If you are interested in our products or have any other questions, please feel free to contact us yang.wang@huaye.us.
The whole line is equipped with spiral pipe machine, end facing &beveling machine and pipe hydrostatic tester.
|
This complete 1620 spiral welded production line was newly built by HUAYE recently. It was successfully commissioned and has been finished trial production in Yunnan, China. The machines will be put into official production and start producing pipes from now on. It'll support the production process efficiently, safely and reliably.
If you are interested in our products or have any other questions, please feel free to contact us yang.wang@huaye.us. The whole line is equipped with spiral pipe machine, end facing &beveling machine and pipe hydrostatic tester.
0 Comments
A new batch of roller conveyors and pipe ejectors produced by Huaye are being packed in factory. Ready for departure. Roller conveyor is used to transport the steel pipe in the pipe production line finishing section. Pipe ejector is used to pull the steel pipe. Usually pull the steel pipes from the conveyer or support roller to the rack. The whole finishing system includes conveyors, racks, ejectors, rotation rollers, pipe delivery cars, and other simple pipe process equipment, such as slag removing machine, weld seam grinder etc. HUAYE provides one-stop supply for all related finishing section equipment, which offers customers the most convenience and production support. Please check huaye.us/pipe-production-line-finishing-section.html for more information. Contact us if you have any requirements for the equipment. yang.wang@huaye.us. The two sets of End facing and beveling machine are completed and finished installing in Yunnan,China. Single head type, used for machining plane and groove of the two ends of steel pipes. Now they'are awaiting power-on testing on site.
3200mm Pipe Beveling Machine Pipe O.D.: φ406-φ3200 mm Pipe Wall thickness: 6-25.4 mm Pipe length: 6-12m 1620mm Pipe Beveling Machine Pipe O.D.: φ400-φ1600 mm Pipe Wall thickness: 6-25.4 mm Pipe length: 6-12m Equipment list: Base Machine box Tool holder Clamping device Lift conveyo Pipe receiver and discharger Control system Hydraulic system Buried embedded parts Contact us if you have interest in a similar one. Yang.wang@huaye.us This 1620mm spiral pipe machine has been officially put into production and the pipes have been successfully discharged in Yunnan,China. It can make spiral pipes of diameter range φ426 to φ1620mm and wall thickness range 4mm to 16 mm.
General specification: Plate width: 600-1500 mm Pipe diameter range: Φ426-1620mm Wall thickness range: 4-16 mm Pipe length: 8-12 m Production Flow: Uncoiler –Pinch and leveler – Guide rollers – Plasma cutter – End welder – guide rollers – Edge mill – Guide roller – Delivery machine – Pre-bending/guide beam – Forming machine – ID welding – OD welding – Plasma cut-off – pipe discharge The completion of this project is another perfect performance of Huaye. We will continue to work hard to provide good after-sales service to our customers. Please contact yang.wang@huaye.us if any further interest regarding the spiral pipe mill project. |
Need any information on metal working machinery? Email: info@huaye.us
Archives
October 2024
Categories
All
|