In case interested in a similar line, please contact yang.wang@huaye.us
Machine introduce:
This machine is a single pressure test, four-beam type, end face seal, low pressure pump filling water, high pressure plunger pump boosting, PLC control can display the whole process of pressure changes during the test, with low labor intensity and convenient operation, etc. Features.
A hydrostatic tester is a machine set to perform leakage and hydraulic pressure test on ERW, spiral welded or seamless pipes. The test involves sealing the two ends of the pipe, and filling the pipe with a liquid, usually water, and pressurization of the vessel to the specified test pressure. Pressure tightness can be tested by shutting off the supply valve and observing whether there is a pressure loss. Huaye hydrostatic tester reaches API standard.
Technical performance
Testing pipe diameter: Φ630mm-Φ3200mm
Testing pipe length: 8-12.5m
Testing pipe wall thickness: 8mm～25.4mm
Test capacity: 2000 Ton
Test pressure: 0～21MPa
Pressure test medium: Water
Testing pipe diameter: Φ630mm-Φ3200mm
Testing pipe length: 8-12.5m
Testing pipe wall thickness: 8mm～25.4mm
Test capacity: 2000 Ton
Test pressure: 0～21MPa
Pressure test medium: Water
In case interested in a similar line, please contact yang.wang@huaye.us
RSS Feed