Overview:
This mill was made in HUAYE EQUIPMENT in 2010. Complete machine for sale due to the bad market cause.
General introduction:
The mill adopts three outer rollers controlled forming type with centralized positioning and front-swing intermittent production. Forming roller surface is combinational curved which is easy to adjust the angle and minimize pressing mark on the pipe surface. Proved by many years of practical production, this mill has features of stable forming and convenient adjustment.
Production process flow:
Coil feeding→ uncoiling →pinching and leveling → electrical vertical roller → shear and butt welding → electrical vertical roller → rotary shear → delivery → guide board → forming → inside welding → outside welding → sized cutting → kick-off
Technical specifications:
Steel strip:
Strip width: 800-2000 mm
Strip thickness: 6.0-25.4 mm
I.D. size: φ610-φ760 mm
O.D. size: φ1200-φ2100 mm
Pipe specifications:
Pipe diameter: φ508-φ3200 mm
Wall thickness: 6-25.4 mm
Sized length: 8-12.5±0.5 m
Welding speed: 0.5-2.0 m/min
Equipment list:
1 - Uncoiler
1 - Pinching and leveling machine
2 - Electrical vertical roller
1 - Shearing and butt welding machine
1 - Rotary shear
1 - Electrical vertical roller
1 - Delivery machine
1 - Guide board
1 - Front bridge
1 - Forming machine
1 - Inside welding machine
1 - Outside welding machine
1 - Rear bridge
1 - Flying cutter
1 - Pipe dropper
1 - Electrical control system
1 - Hydraulic system
Equipment price:
Asking for price: Yang.wang@huaye.us
This mill was made in HUAYE EQUIPMENT in 2010. Complete machine for sale due to the bad market cause.
General introduction:
The mill adopts three outer rollers controlled forming type with centralized positioning and front-swing intermittent production. Forming roller surface is combinational curved which is easy to adjust the angle and minimize pressing mark on the pipe surface. Proved by many years of practical production, this mill has features of stable forming and convenient adjustment.
Production process flow:
Coil feeding→ uncoiling →pinching and leveling → electrical vertical roller → shear and butt welding → electrical vertical roller → rotary shear → delivery → guide board → forming → inside welding → outside welding → sized cutting → kick-off
Technical specifications:
Steel strip:
Strip width: 800-2000 mm
Strip thickness: 6.0-25.4 mm
I.D. size: φ610-φ760 mm
O.D. size: φ1200-φ2100 mm
Pipe specifications:
Pipe diameter: φ508-φ3200 mm
Wall thickness: 6-25.4 mm
Sized length: 8-12.5±0.5 m
Welding speed: 0.5-2.0 m/min
Equipment list:
1 - Uncoiler
1 - Pinching and leveling machine
2 - Electrical vertical roller
1 - Shearing and butt welding machine
1 - Rotary shear
1 - Electrical vertical roller
1 - Delivery machine
1 - Guide board
1 - Front bridge
1 - Forming machine
1 - Inside welding machine
1 - Outside welding machine
1 - Rear bridge
1 - Flying cutter
1 - Pipe dropper
1 - Electrical control system
1 - Hydraulic system
Equipment price:
Asking for price: Yang.wang@huaye.us