Used φ254mm×8mm HF Pipe Mill, very good condition, still in line for inspection. Complete mill with tooling for round, square, rectangular and channels. Reduced Pricing!! 

Basic Information
The production line is used to product longitudinal ERW tubes and cold-roll shaped steel material. The material to be processed is mild steel or low alloy steel (бb≤580Mpa，бs≤380Mpa), eg. Q195-Q345, 510L, 16Mn, SPHC, 09CuPTiRe.
Year: 2007
Make: 
Coil entry, accumulator and cut-off: Shenyang Institute of Technology
Mill section: Zhongtai
Welder: Sanyi Tianxing
Technical details
1. Mill height: 950 mm
2. Product property:
    a.       Coil width: 150 – 800 mm
    b.      Tube O.D.: 89 – 254 mm
    c.       Rectangular: 40×50 – 150×250 mm
    d.      Square: 50×50 – 200×200 mm
    e.       U shape steel: max. width 350mm, max height 200mm (cannot reach at same time)
    f.       Thickness: 2 – 8 mm
    g.      Length: 4 – 12 mm
3. Production speed: 10 – 60 m/min
4. Forming and sizing:
    a.       Horizontal stands: 14
    b.      Vertical stands: 5
     c.       Adjustable vertical stands: 6
5. Horizontal roller shaft dia.: φ140 mm
6. Vertical roller shaft dia.: φ100 mm
7. HF welder: 600 kW (new in 2012)
8. Motor type: Z4-280-21
    a.      Power: 132 KW
    b.      RPM: 750 – 1600 RPM
9. External dimension: L×W×H: 125000×9300×2300
Equipment List
1 - Uncoiler
1 - Leveler
1 - Crop shear and end welder
1 - Horizontal Spiral Accumulator
1 - Edge slitter
1 - Coil Entry Stand
14 - Horizontal Roller Stands
4 - Vertical Roller Stands
6 - Adjustable Roller Stands
1 - Guiding Roller Stands
1 - Squeeze Stands
2 - Deburring Stands
1 - Cooling Sink
2 - Turks head
6 - Forming Stand base
6 - Gearbox base
14 - Gear Box
1 - Computerized flying saw
1 - 500KW solid state HF welder
1 - Conveyor stands
1 - Complete electric control
Tooling:Round: φ141.3, φ168.3, φ219
Square: Max.203.2x203.2，Min. 60x60mm；
Rectangular: Max.254x152.4，Min.70x50；
Channel steel: Max.320x130，Min.120x60
Pricing and Terms
Email yang.wang@huaye.us for pricing and terms!